Preliminary Steps; Disconnecting The Power Cables - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Power supply
6.2.2

Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Disabling BitLocker functionality" on page 75
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
5. "Opening the server" on page 64
6.2.3

Disconnecting the power cables

Figure 21: Disconnecting the power cables
Ê Disconnect the two power cables from the system board connectors
"PWR2" and "PWR1".
108 Upgrade and Maintenance Manual
RX100 S7