Re-Installing The Tpm; Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

15.3.3.4 Re-installing the TPM

Figure 256: TPM spacer
Ê The TPM spacer is already present on the system board.
Ê Reinstall the TPM as described in section

15.3.3.5 Concluding steps

Ê Perform the following procedures:
1. Reinstall the system board as described in section
system board" on page 380
2. "Closing the server" on page 66
3. "Installing the server in the rack" on page 68
4. "Switching on the server" on page 72
5. "Enabling BitLocker functionality" on page 94
6. "Closing the rack door" on page 73
I
You can find information on configuring the TPM in the "BIOS Setup
Utility" manual.
RX100 S7
Upgrade and Maintenance Manual
System board and components
"Installing the TPM" on page
"Installing the new
365.
373