Removing The Ufm; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.

15.2.2 Removing the UFM

Field Replaceable Units (FRU)
Average task duration: 5 minutes
V
CAUTION!
Follow the safety instructions in chapter
page 43.

15.2.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Main steps:
●
– Phillips PH1 / (+) No. 1 screw driver
– long nose pliers
– combination pliers

15.2.2.2 Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Disabling SVOM boot watchdog functionality" on page 76
3. "Disabling BitLocker functionality" on page 75
4. "Shutting down the server" on page 59
5. "Extending/removing the server from the rack" on page 60
6. "Opening the server" on page 64
RX100 S7
Upgrade and Maintenance Manual
System board and components
"Important information" on
355