Installing The Retaining Spring On The Odd; Installing The Odd - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Optical disk drive

12.2.5 Installing the retaining spring on the ODD

Figure 197: Installing the retaining spring on the ODD
Ê Fasten the retaining spring with two screws to the rear side of the ODD.

12.2.6 Installing the ODD

Figure 198: Installing the ODD
Ê Push the ODD into the bay (1) simultaneously pressing the front of the ODD
slightly down until the retaining spring engages (2).
300 Upgrade and Maintenance Manual
RX100 S7