Installing The New Sata Cable; Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

16.7.4 Installing the new SATA cable

Figure 294: Connecting the SATA cable to the system board
Ê Connect the SATA cable to the corresponding connector on the system
board according the color coding.
Ê Route the SATA cable as before.
Figure 295: Connecting the SATA cable to the SAS/SATA backplane
Ê Connect the SATA cable to the SAS/SATA backplane according the color
coding.

16.7.5 Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Closing the rack door" on page 73
RX100 S7
Upgrade and Maintenance Manual
Cables
411