Removing Expansion Card Slot Brackets; Required Tools; Removing An Expansion Card Slot Bracket - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.2.2

Removing expansion card slot brackets

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
V
CAUTION!
Follow the safety instructions in chapter
page 43.
9.2.2.1

Required tools

Phillips PH2 / (+) No. 2 screw driver
●
9.2.2.2

Removing an expansion card slot bracket

Ê Remove the two M3 x 4.5 mm screws.
Ê Remove the controller from the mounting tabs on the slot bracket.
190 Upgrade and Maintenance Manual
"Important information" on
RX100 S7