Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual page 241

Figure 150: Installing the BBU with the BBU holder
Ê Insert the BBU holder into the chassis so that the three shoulder screw caps
on the chassis floor rest in the wide ends of the keyhole slots on the BBU
holder.
Ê Slide the BBU holder in direction of the arrow.
The shoulder screw caps on the chassis floor will lock in the narrow ends of
the keyhole slots on the BBU holder.
Ê Ensure that the locking handle on the BBU holder properly snaps in place
(see circle).
RX100 S7
Upgrade and Maintenance Manual
Expansion cards and backup units
241