Removing The Defective Fbu From The Chassis; Removing The Defective Fbu From The Fbu Holder - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

9.5.6.3

Removing the defective FBU from the chassis

Ê Remove the FBU from the chassis as described in section
FBU" on page
9.5.6.4

Removing the defective FBU from the FBU holder

Figure 173: Disconnecting the FBU adapter cable from the FBU
Ê Press down on the locking latch on the FBU cable (see close-up) and
disconnect the FBU adapter cable.
RX100 S7
255.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Removing the
265