Replacing The Sata Cables For The Backplane; Concluding Steps; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

16.6.5 Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Closing the rack door" on page 73
16.7 Replacing the SATA cables for the
backplane
Field Replaceable Units (FRU)
Average task duration: 5 minutes
V
CAUTION!
Follow the safety instructions in chapter
page 43.

16.7.1 Required tools

Preliminary and concluding steps: tool-less
●
Main steps: tool-less
●

16.7.2 Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
RX100 S7
Upgrade and Maintenance Manual
"Important information" on
Cables
409