Removing The Front Vga/Lan Module; Installing The Dummy Cover - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Management and diagnostics modules

14.3.2.7 Removing the front VGA/LAN module

Figure 231: Removing the front VGA/LAN module
Ê Press the locking mechanism down (1).
Ê Push the front VGA/LAN module frontward (2) and out of the bay.

14.3.2.8 Installing the dummy cover

Figure 232: Installing the dummy cover
Ê Push the dummy cover inward until it engages at the right side.
338 Upgrade and Maintenance Manual
RX100 S7