Removing The Defective Sgpio Cable - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Cables
5. "Opening the server" on page 64

16.6.3 Removing the defective SGPIO cable

Figure 288: Disconnecting the SGPIO cable from the SAS/SATA backplane
Ê Disconnect the SGPIO cable from the SAS/SATA backplane.
Figure 289: Disconnecting the SGPIO cable from the system board
Ê Disconnect the SGPIO cable from the system board.
Ê Remove the SGPIO cable from the cable clamp (see circle).
Upgrade and Maintenance Manual 407
RX100 S7