Installing The Retaining Spring To The Dummy Cover; Installing The Dummy Cover - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Optical disk drive

12.3.6 Installing the retaining spring to the dummy cover

Figure 203: Installing the retaining spring to the dummy cover
Ê Insert the retaining spring in the dummy cover (1).
Ê Fasten the retaining spring with two screws to dummy cover (2).

12.3.7 Installing the dummy cover

Figure 204: Installing the dummy cover (bottom side)
Ê Push the dummy cover inward until it engages at the right side.
Upgrade and Maintenance Manual 305
RX100 S7