Optical Disk Drive; Position Of The Odd Bay; Installing The Odd - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

12

Optical disk drive

12.1

Position of the ODD bay

Figure 194: Position of the ODD bay
You can install a 5.25-inch slimline optical disk drive (ODD) in the left bottom
side bay.
12.2

Installing the ODD

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
V
CAUTION!
Before installing/removing an accessible drive to/from the server, turn
●
off the server, all peripheral devices, and any other connected
devices. Also unplug all power cables from the outlet. Failure to do so
can cause electric shock.
When installing an accessible drive, hold it by the side. Applying force
●
to the top may cause failures.
Do not touch the circuitry on boards and soldered parts. Hold the
●
metallic areas or the edge of the circuit boards.
The circuit boards and soldered parts of internal options are exposed
●
and can be damaged by static electricity. Before handling them, first
touch a metal part on the server to discharge static electricity from
your body.
RX100 S7
Upgrade and Maintenance Manual 297