14.3.1.3 Removing the riser module 1
Figure 219: Removing the riser module 1
Ê Carefully pull out the riser module 1 upward.
14.3.1.4 Removing the dummy cover
Figure 220: Removing the dummy cover
Ê Pull the dummy cover out of the bay.
V
CAUTION!
Keep the dummy cover for future use. If the LSP is removed again and
not replaced with a new one, then the dummy cover must be reinstalled
due to cooling, the applicable EMC regulations (regulations on
electromagnetic compatibility) and fire protection.
RX100 S7
Management and diagnostics modules
Upgrade and Maintenance Manual
329