Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual page 383

21. If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller
(expansion card or onboard).
The following notes are required for RX100 S7p (PYR10Pxxx for
Japanese market).
I
Configuration of network settings should be performed by the
customer. For further information, please refer to section
network settings recovery" on page
22. If applicable, restore LAN teaming configurations as described in section
"After replacing the system board" on page 98
23. "Closing the rack door" on page 73
RX100 S7
Upgrade and Maintenance Manual
System board and components
375.
"Note on
383