Installing The New Memory Module; Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

10.4.4 Installing the new memory module

Figure 180: Installing the memory module
Ê Carefully press the memory module into the memory slot (1) until the
securing clips on both sides of it engage (2).

10.4.5 Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Updating the system board BIOS and iRMC" on page 81
4. "Enabling replaced components in the system BIOS" on page 89
5. "Verifying the memory mode" on page 90
6. "Enabling SVOM boot watchdog functionality" on page 89
7. "Switching on the server" on page 72
8. "Enabling BitLocker functionality" on page 94
9. "Closing the rack door" on page 73
RX100 S7
Upgrade and Maintenance Manual
Main memory
277