Removing The Defective Heat Sink; Removing The Air Duct; Cleaning The Processor Surface; Removing The Protective Cover From The New Heat Sink - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Processor

11.3.4 Removing the air duct

Ê Remove the air duct as described in section
page 282.

11.3.5 Removing the defective heat sink

Ê Remove the heat sink as described in section
page 283.

11.3.6 Cleaning the processor surface

Ê Remove the residual thermal paste from the processor surface.
Ê Clean the processor surface using a lint-free cloth.
11.3.7 Removing the protective cover from the new heat
sink
Ê Remove the protective cover on the underside of the heat sink.
V
CAUTION!
Do not touch the thermal paste on the underside of the heat sink.

11.3.8 Installing the new heat sink

Ê Install the heat sink as described in section
page 290.

11.3.9 Installing the air duct

Ê Install the air duct as described in section
page 291.
294 Upgrade and Maintenance Manual
"Removing the air duct" on
"Removing the heat sink" on
"Installing the heat sink" on
"Installing the air duct" on
RX100 S7