2.3
Tools you need at hand
When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
Screw driver/
bit insert
Phillips
PH2 / (+) No. 2
Phillips
PH2 / (+) No. 2
Special bit insert
Phillips
PH1 / (+) No. 1
Phillips
PH1 / (+) No. 1
Table 3: List of used screws (not applicable for the Japanese market)
RX100 S7
Screw
Upgrade and Maintenance Manual
Before you start
Usage
Type
M3 x 4.5 mm
(silver)
Optical disk
drive, chassis
C26192-Y10-
C67
M3 x 6 mm
(silver)
System board
C26192-Y10-
C68
REM 3 x 15 mm
(black)
TPM screw
C26192-Y10-
C176
M3 x 4.5 mm
UFM nylon
(white)
screw
A3C40109082
TFM module
M2.5 x 4 mm
(silver)
C26192-Y10-
C103
39