Replacing The Front Vga/Lan Module; Required Tools; Preliminary Steps; Removing The Riser Module 1 - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Management and diagnostics modules

14.3.3 Replacing the front VGA/LAN module

Field Replaceable Units (FRU)
Average task duration: 5 minutes
V
CAUTION!
Follow the safety instructions in chapter
page 43.

14.3.3.1 Required tools

Preliminary and concluding steps: tool-less
●
Main steps: tool-less
●

14.3.3.2 Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Disabling BitLocker functionality" on page 75
4. "Shutting down the server" on page 59
5. "Extending/removing the server from the rack" on page 60
6. "Opening the server" on page 64

14.3.3.3 Removing the riser module 1

Ê Remove the riser module 1 as described in section
module 1" on page

14.3.3.4 Removing the front LAN card

Ê Remove the front LAN card as described in section
card" on page
340
336.
336.
Upgrade and Maintenance Manual
"Important information" on
"Removing the riser
"Removing the front LAN
RX100 S7