Installing The New Bbu In The Bbu Holder - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

9.5.5.7

Installing the new BBU in the BBU holder

I
There are different BBUs available. Please notice the position of the
three bolts (see circles in
position for installing the BBU in the BBU holder.
Figure 171: Installing the BBU in the BBU holder
Ê At a slight angle, fit the BBU under the right retaining bracket on the BBU
holder (1).
Ê Fold down the BBU until it locks in place (2).
RX100 S7
figure 147and
Upgrade and Maintenance Manual
Expansion cards and backup units
figure 148) to recognise the right
261