Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Figure 214: Connecting the CSS cable to the system board
Ê Connect the CSS cable to the system board connector "CSS".

14.2.1.6 Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Closing the rack door" on page 73
RX100 S7
Management and diagnostics modules
Upgrade and Maintenance Manual 321