Removing The Riser Module 2; Removing The Defective Expansion Card - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
4. "Disabling SVOM boot watchdog functionality" on page 76
5. "Disabling BitLocker functionality" on page 75
6. "Shutting down the server" on page 59
7. "Extending/removing the server from the rack" on page 60
8. "Opening the server" on page 64
9. "Locating the defective component" on page 58
9.4.6.3

Removing the riser module 2

Ê Remove the riser module 2 as described in section
module 2" on page
9.4.6.4

Removing the defective expansion card

Figure 133: Removing the expansion card- slot 2
Ê Pull out the expansion card from the riser card slot.
Ê If the slot bracket on the defective expansion card is to be reused, remove it
from the board as described in section
brackets" on page
222
213.
183.
Upgrade and Maintenance Manual
"Removing the riser
"Installing expansion card slot
RX100 S7