Ethernet Port Configuration; Chapter 1 Port Basic Configuration; Initially Configuring A Port - H3C S5600 Series Operation Manual

Operation Manual – Port Basic Configuration
H3C S5600 Series Ethernet Switches

Chapter 1 Port Basic Configuration

Note:
The auto-negotiation speed configuration on a port is added to this manual. For
details, refer to section
The configuration for port Up/Down log output is added to this manual. For details,
refer to section
The storm control function is added to this manual. For details, refer to section
Configuring Storm Control on a
The feature to display/clear the statistics on dropped packets is newly added. For
details, refer to section
The port state change delay configuration is added to this manual. For details, refer
to Setting the Port State Change

1.1 Ethernet Port Configuration

1.1.1 Initially Configuring a Port

Follow these steps to initially configure a port:
To do...
Enter system view
Enter Ethernet port
view
Enable the Ethernet
port
Set the description
string for the
Ethernet port
Set the duplex mode
of the Ethernet port
Configuring Port Auto-Negotiation
Disabling Up/Down Log Output on a
Port.
Displaying and Maintaining Basic Port
Delay.
Use the command...
system-view
interface interface-type
interface-number
undo shutdown
description text
duplex { auto | full |
half }
1-1
Chapter 1 Port Basic Configuration
Speed.
Port.
Configuration.
Remarks
—
—
Optional
By default, the port is enabled.
Use the shutdown command to
disable the port.
Optional
By default, the description string
of an Ethernet port is null.
Optional
By default, the duplex mode of
the port is auto
(auto-negotiation).