H3C S5600 Series Operation Manual page 205

Operation Manual – Port Isolation
H3C S5600 Series Ethernet Switches
II. Network diagram
PC1
Figure 1-1 Network diagram for port isolation configuration
III. Configuration procedure
# Add GigabitEthernet1/0/2, GigabitEthernet1/0/3, and GigabitEthernet1/0/4 ports to
the isolation group.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface GigabitEthernet1/0/2
[Sysname-GigabitEthernet1/0/2] port isolate
[Sysname-GigabitEthernet1/0/2] quit
[Sysname] interface GigabitEthernet1/0/3
[Sysname-GigabitEthernet1/0/3] port isolate
[Sysname-GigabitEthernet1/0/3] quit
[Sysname] interface GigabitEthernet1/0/4
[Sysname-GigabitEthernet1/0/4] port isolate
[Sysname-GigabitEthernet1/0/4] quit
[Sysname]
# Display the information about the ports in the isolation group.
<Sysname> display isolate port
Isolated port(s) on UNIT 1:
GigabitEthernet1/0/2, GigabitEthernet1/0/3, GigabitEthernet1/0/4
Internet
GE1/0/1
Switch
PC2 PC3
1-3
Chapter 1 Port Isolation Configuration