Displaying And Maintaining Gvrp - H3C S5600 Series Operation Manual

Operation Manual – GVRP
H3C S5600 Series Ethernet Switches
Enter Ethernet port view
Configure GVRP port
registration mode

1.3 Displaying and Maintaining GVRP

Display GARP statistics
Display the settings of the
GARP timers
Display GVRP statistics
Display the global GVRP
status
Clear GARP statistics
1.4 GVRP Configuration Example
1.4.1 GVRP Configuration Example
I. Network requirements
Enable GVRP on all the switches in the network so that the VLAN configurations
on Switch C and Switch E can be applied to all switches in the network, thus
implementing dynamic VLAN information registration and refresh.
By configuring the GVRP registration modes of specific Ethernet ports, you can
enable the corresponding VLANs in the switched network to communicate with
each other.
To do ...
interface interface-type
interface-number
gvrp registration { fixed |
forbidden | normal }
To do ...
display garp statistics
[ interface interface-list ]
display garp timer
[ interface interface-list ]
display gvrp statistics
[ interface interface-list ]
display gvrp status
reset garp statistics
[ interface interface-list ]
Use the command ...
Use the command ...
1-8
Chapter 1 GVRP Configuration
Remarks
—
Optional
By default, GVRP port
registration mode is
normal.
Remarks
Available in any view