H3C S5600 Series Operation Manual page 172

Operation Manual – GVRP
H3C S5600 Series Ethernet Switches
8
7) Configure GigabitEthernet1/0/1 on Switch E to operate in fixed GVRP registration
mode and display the VLAN information dynamically registered on Switch A,
Switch B, and Switch E.
# Configure GigabitEthernet1/0/1 on Switch E to operate in fixed GVRP registration
mode.
[SwitchE] interface GigabitEthernet 1/0/1
[SwitchE-GigabitEthernet1/0/1] gvrp registration fixed
# Display the VLAN information dynamically registered on Switch A.
[SwitchA] display vlan dynamic
Total 3 dynamic VLAN exist(s).
The following dynamic VLANs exist:
5, 7, 8,
# Display the VLAN information dynamically registered on Switch B.
[SwitchB] display vlan dynamic
Total 3 dynamic VLAN exist(s).
The following dynamic VLANs exist:
5, 7, 8,
# Display the VLAN information dynamically registered on Switch E.
[SwitchE-GigabitEthernet1/0/1] display vlan dynamic
No dynamic vlans exist!
8) Configure GigabitEthernet1/0/1 on Switch E to operate in forbidden GVRP
registration mode and display the VLAN registration information dynamically
registered on Switch A, Switch B, and Switch E.
# Configure GigabitEthernet1/0/1 on Switch E to operate in forbidden GVRP
registration mode.
[SwitchE-GigabitEthernet1/0/1] gvrp registration forbidden
# Display the VLAN information dynamically registered on Switch A.
[SwitchA] display vlan dynamic
Total 2 dynamic VLAN exist(s).
The following dynamic VLANs exist:
5, 8,
# Display the VLAN information dynamically registered on Switch B.
[SwitchB] display vlan dynamic
Total 2 dynamic VLAN exist(s).
The following dynamic VLANs exist:
5, 8,
# Display the VLAN information dynamically registered on Switch E.
1-11
Chapter 1 GVRP Configuration