Turning The Power Switch On Or Off; Using The Power Key; When Using The Power Key As A Power Save Key - Konica Minolta BIZHUB C3851FS Quick Start Manual

3
3.2.2

Turning the Power Switch ON or OFF

1
When turning the main power on, press n of the Power Switch.
The Start key lights up orange, and a screen appears to show that this machine is in the process of
start-up.
When the Start key changes to blue, this machine is ready to use.
2
When turning the main power off, press o of the Power Switch.
NOTICE
When restarting this machine, turn the Power Switch off and on again after 10 or more seconds have elapsed.
Not doing so may result in an operation failure.
3.2.3

Using the Power key

Press the Power key to switch this machine to the Power Save mode.
You can select [Power Save] or [Sub Power OFF] as Power Save mode that is activated when the Power key
is pressed.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Set-
tings] - [Power Save Key] (default: [Power Save])

When using the Power key as a Power Save key

When the Power key is pressed, the status of this machine changes as shown below. Depending on how
long the Power key is pressed, the state of the power save mode to be activated will differ.
Power key
Short press
3-10
Status of Status of
this ma- LED
chine
Low Power Flash:
mode Blue
(Default)
Sleep mode Flash:
Blue
About Power Supply
Description
Turns off the display of the Touch Panel to reduce pow-
er consumption.
This machine returns to the normal mode when it re-
ceives data or faxes or when the user operates the
Touch Panel.
Provides power-saving effect higher than Low Power
mode. A time required to return to the normal mode is
longer than Low Power mode.
This machine returns to the normal mode when it re-
ceives data or faxes or when the user operates the
Touch Panel.
bizhub C3851FS/C3851/C3351
3.2