Displaying IP multicast statistics
To display IP multicast statistics on a device, enter the following commands at any level of the CLI.
BigIron RX# show ip multicast statistics
IP multicast is enabled - Passive
VLAN ID 1
Reports Received:
Leaves Received:
General Queries Received:
Group Specific Queries Received: 2
Others Received:
General Queries Sent:
Group Specific Queries Sent:
VLAN ID 2
Reports Received:
Leaves Received:
General Queries Received:
Group Specific Queries Received: 2
Others Received:
General Queries Sent:
Group Specific Queries Sent:
The command in this example shows statistics for two port-based VLANs.
Syntax: show ip multicast statistics
Clearing IP multicast statistics
To clear IP multicast statistics on a device, enter the following command at the Privileged EXEC
level of the CLI.
BigIron RX# clear ip multicast statistics
This command resets statistics counters for all the statistics displayed by the show ip multicast
statistics command to zero.
Syntax: clear ip multicast statistics
Clearing IGMP group flows
To clear all the IGMP flows learned by the device, enter the following command at the Privileged
EXEC level of the CLI.
BigIron RX# clear ip multicast all
BigIron RX Series Configuration Guide
53-1001810-01
Displaying IP multicast information
34
21
60
0
0
0
0
0
60
0
0
0
41
1061