Dell PowerConnect B-RX Configuration Manual page 1227

TABLE 188
This field...
UnAckSeq
IRcvSeq
RcvNext
SendWnd
TotalRcv
DupliRcv
RcvWnd
SendQue
RcvQue
CngstWnd
Displaying routes advertised to a BGP4+ neighbor
You can display a summary or detailed information about the following:
•
•
For example, to display a summary of all routes a switch has advertised to neighbor 2000:4::110,
enter the following command at any level of the CLI.
BigIron RX# show ipv6 bgp neighbor 2000:4::110 advertised-routes
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST E:EBGP I:IBGP L:LOCAL
1
2
Syntax: show ipv6 bgp neighbor <ipv6-address> advertised-routes [detail]
The <ipv6-address> parameter displays routes advertised to a specified neighbor. You must specify
this address in hexadecimal using 16-bit values between colons as documented in RFC 2373.
The detail keyword displays detailed information about the advertised routes. If you do not specify
this keyword, a summary of the advertised routes displays.
The <ipv6-prefix>/<prefix-length> parameter displays the specified route advertised to the
neighbor only. You must specify the <ipv6-prefix> parameter in hexadecimal using 16-bit values
between colons as documented in RFC 2373. You must specify the <prefix-length> parameter as a
decimal value. A slash mark (/) must follow the <ipv6-prefix> parameter and precede the
<prefix-length> parameter.
BigIron RX Series Configuration Guide
53-1001810-01
BGP4+ neighbor configuration information and statistics (Continued)
All routes a switch has advertised to a neighbor.
A specified route a switch has advertised to a neighbor.
There are 2 routes advertised to neighbor 2000:4::110
Prefix
2002:1234::/32
AS_PATH:
2002::/16
AS_PATH:
<ipv6-prefix>/<prefix-length>
Displaying BGP4+ information
Displays...
The current acknowledged sequence number.
The initial receive sequence number for the session.
The next sequence number expected from the neighbor.
The size of the send window.
The number of sequence numbers received from the neighbor.
The number of duplicate sequence numbers received from the neighbor.
The size of the receive window.
The number of sequence numbers in the send queue.
The number of sequence numbers in the receive queue.
The number of times the window has changed.
Next Hop Metric
:: 1
:: 1
LocPrf Weight Status
32768 BL
32768 BL
45
1155