Mac Address Or Port - Dell PowerConnect B-RX Configuration Manual

31
Displaying multi-device port authentication information
TABLE 145
This field...
Port move-back VLAN
MAC Filter applied
MAC Table
Syntax: show auth-mac-address detail
Displaying multi-device port authentication information for a specific

MAC address or port

To display authentication information for a specific MAC address or port, enter a command such as
the following.
BigIron RX# show auth-mac-address 0007.e90f.eaa1
-------------------------------------------------------------------------------
MAC/IP Address
-------------------------------------------------------------------------------
00A1.0010.2000
Syntax: show auth-mac-address <mac-address> | <ip-address> | <slot>/<portnum>
The <ip-address> parameter lists the MAC address associated with the specified IP address.
The <slot>/<portnum> parameter lists the MAC addresses on the specified port.
The following table describes the information displayed by the show auth-mac-address command
for a specified MAC address or port.
TABLE 146
This field...
MAC/IP Address
Port
VLAN
Access
Age
940
Output from the show authenticated-mac-address command (Continued)
Displays...
The VLAN that the port reverts to when the RADIUS-assigned dynamic
VLAN expires.
Whether a MAC filter has been applied to this port to specify
pre-authenticated MAC addresses.
The MAC addresses learned on the port.
Port Vlan
1/18 1
Output from the show auth-mac-address
Displays...
The MAC address for which information is displayed. If the packet for
which multi-device port authentication was performed also contained an
IP address, then the IP address is displayed as well.
The port on which the MAC address was learned.
The VLAN to which the MAC address was assigned.
Whether or not the MAC address was allowed or denied access into the
network.
The age of the MAC address entry in the authenticated MAC address list.
Access Age
Allowed 0
<address>
command
BigIron RX Series Configuration Guide
53-1001810-01