Dell PowerConnect B-RX Configuration Manual page 1235

For example, to display details about routes received from neighbor 2000:1:1::1, enter the
following command at any level of the CLI.
BigIron RX# show ipv6 bgp neighbor 2000:1:1::1 received-routes detail
There are 4 received routes from neighbor 2000:1:1::1
Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
1 Prefix: 1000:1:1::/64, Status: BI, Age: 0h17m25s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH:
Adj_RIB_out count: 1, Admin distance 200
2 Prefix: 2000:1:1::/64, Status: I, Age: 0h17m25s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH:
3 Prefix: 2000:1:11::1/128, Status: BI, Age: 0h17m25s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: igp, Weight: 0
AS_PATH:
Adj_RIB_out count: 1, Admin distance 200
4 Prefix: 2000:1:17::/64, Status: BI, Age: 0h17m25s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH:
Adj_RIB_out count: 1, Admin distance 200
This display shows the following information.
TABLE 195
This field...
Number of BGP4+ routes received from
a neighbor
Status codes
Prefix
Status
Age
Next hop
Learned from peer
Local pref
MED
BigIron RX Series Configuration Guide
53-1001810-01
Detailed route information received from a BGP4+ neighbor
Displays...
For information about this field, refer to
For information about this field, refer to
For information about this field, refer to
For information about this field, refer to
The age of the route, in seconds.
The next-hop switch for reaching the route from the switch.
The IPv6 address of the neighbor from which this route is learned. "Local
Router" indicates that the switch itself learned the route.
For information about this field, refer to
The value of the route's MED attribute. If the route does not have a
metric, this field is blank.
Displaying BGP4+ information
Table 194 on page 1161.
Table 194 on page 1161.
Table 194 on page 1161.
Table 194 on page 1161.
Table 194 on page 1161.
45
1163