Dell PowerConnect B-RX Configuration Manual page 1292

48
Displaying OSPFv3 information
The advrtr <ipv4-address> parameter displays detailed information about the LSAs for a specified
advertising router only.
The as-external keyword displays detailed information about the AS externals LSAs only.
The extensive keyword displays detailed information about all LSAs in the database.
The inter-prefix keyword displays detailed information about the inter-area prefix LSAs only.
The inter-router keyword displays detailed information about the inter-area router LSAs only.
The intra-prefix keyword displays detailed information about the intra-area prefix LSAs only.
The link keyword displays detailed information about the link LSAs only.
The link-id <number> parameter displays detailed information about the specified link LSAs only.
The network <number> displays detailed information about the network LSAs only.
The router <number> displays detailed information about the router LSAs only.
The scope <area-id> parameter displays detailed information about the LSAs for a specified area,
AS, or link.
This display shows the following information.
TABLE 205
This field...
Area ID
Type
LS ID
Adv Rtr
Seq(Hex)
Age
Chksum
Len
1220
OSPFv3 database summary fields
Displays...
The OSPF area in which the Brocade device resides.
Type of LSA. LSA types can be the following:
•
Rtr – Router LSAs (Type 1).
•
Net – Network LSAs (Type 2).
•
Inap – Inter-area prefix LSAs for ABRs (Type 3).
•
Inar – Inter-area router LSAs for ASBRs (Type 4).
•
Extn – AS external LSAs (Type 5).
•
Link – Link LSAs (Type 8).
•
Iap – Intra-area prefix LSAs (Type 9).
The ID of the LSA, in hexadecimal, from which the device learned this route.
The device that advertised the route.
The sequence number of the LSA. The OSPF neighbor that sent the LSA stamps it with
a sequence number to enable the Brocade device and other OSPF routers to determine
which LSA for a given route is the most recent.
The age of the LSA, in seconds.
A checksum for the LSA packet. The checksum is based on all the fields in the packet
except the age field. The Brocade device uses the checksum to verify that the packet is
not corrupted.
The length, in bytes, of the LSA.
BigIron RX Series Configuration Guide
53-1001810-01