Displaying Ospf External Link State Information - Dell PowerConnect B-FCXs Configuration Manual

Powerconnect b-series fcx
Hide thumbs Also See for PowerConnect B-FCXs:
Table of Contents

Advertisement

PowerConnect#show ip ospf redistribute route 3.1.0.0 255.255.0.0
3.1.0.0 255.255.0.0 static

Displaying OSPF external link state information

To display external link state information, enter the following command at any CLI level.
PowerConnect#show ip ospf database external-link-state
Index Aging
1
2
3
4
5
6
7
8
9
Syntax: show ip ospf database external-link-state [advertise <num>] | [extensive] | [link-state-id
The advertise <num> parameter displays the hexadecimal data in the specified LSA packet. The
<num> parameter identifies the LSA packet by its position in the router External LSA table. To
determine an LSA packet position in the table, enter the show ip ospf external-link-state command
to display the table. Refer to
The extensive option displays the LSAs in decrypted format.
NOTE
You cannot use the extensive option in combination with other display options. The entire database
is displayed.
The link-state-id <ip-addr> parameter displays the External LSAs for the LSA source specified by
<IP-addr>.
The router-id <ip-addr> parameter shows the External LSAs for the specified OSPF router.
The sequence-number <num(Hex)> parameter displays the External LSA entries for the specified
hexadecimal LSA sequence number.
The status <num> option shows status information.
This display shows the following information.
TABLE 179
Field
Area ID
Aging
LS ID
Router
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
LS ID
1794
1.168.64.0
1794
3.215.0.0
1794
1.27.250.0
1794
1.24.23.0
1794
1.21.52.0
1794
1.18.81.0
1794
1.15.110.0
1794
1.12.139.0
1794
1.9.168.0
<ip-addr>] | [router-id <ip-addr>] | [sequence-number <num(Hex)>] | [status <num>]
"Displaying the data in an LSA"
CLI display of OSPF external link state information
Definition
The OSPF area the router is in.
The age of the LSA, in seconds.
The ID of the link-state advertisement from which the Layer 3 Switch learned this route.
The router IP address.
Displaying OSPF information
Router
Netmask
192.85.0.3
ffffe000 000003e8
192.85.0.3
ffff0000 000003e8
192.85.0.3
fffffe00 000003e8
192.85.0.3
ffffff00 000003e8
192.85.0.3
ffffff00 000003e8
192.85.0.3
ffffff00 000003e8
192.85.0.3
ffffff00 000003e8
192.85.0.3
ffffff00 000003e8
192.85.0.3
ffffff00 000003e8
on page 976 for an example.
Metric
Flag
b500 0.0.0.0
b500 0.0.0.0
b500 0.0.0.0
b500 0.0.0.0
b500 0.0.0.0
b500 0.0.0.0
b500 0.0.0.0
b500 0.0.0.0
b500 0.0.0.0
29
975

Advertisement

Table of Contents
loading

Table of Contents