Displaying Bgp4+ Neighbor Information - Dell PowerConnect B-RX Configuration Manual

TABLE 187
This field...
Flaps
Since
Reuse
Path
You also can display all the dampened routes by using the show ipv6 bgp dampened-paths
command. For more information, refer to

Displaying BGP4+ neighbor information

You can display the following information about a switch's BGP4+ neighbors:
•
•
•
•
•
•
•
•
•
•
BigIron RX Series Configuration Guide
53-1001810-01
Route flap dampening statistics
Configuration information and statistics.
Router advertisements.
Route-attribute entries.
Route flap dampening statistics.
The last packet containing an error.
Received Outbound Route Filters (ORFs).
Routes received from a neighbor.
BGP4+ Routing Information Base (RIB).
Received best, not installed best, and unreachable routes.
Route summary.
Displaying BGP4+ information
Displays...
The number of flaps (state changes) the route has experienced.
The amount of time (in hh:mm:ss) since the first flap of this route.
The amount of time (in hh:mm:ss) after which the path is again
available.
The AS path of the route.
"Displaying dampened BGP4+ paths"
45
on page 1142.
1149