4. HDLM Operation
4.3.11 Viewing HDLM Component Information
This section explains how to display HDLM component information.
To display HDLM component information, execute the
operation with the
executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Reservation Status
Intermittent Error Monitor
HDLM Manager Ver
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
LicenseType Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Among the displayed items,
indicate the HDLM component information.
Also, you can view information for each HDLM component. Execute the
command's
view
following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -adrv
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -pdrv
350
parameter specified. The following is an example of
-sys
WakeupTime
x.x.x-xx
yyyy/mm/dd hh:mm:ss
WakeupTime
x.x.x-xx
WakeupTime
x.x.x-xx
yyyy/mm/dd hh:mm:ss
-
HDLM Manager
operation with the
-sys
dlnkmgr
x.x.x-xx
:
:
: on(extended lio)
:
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
:
: off
yyyy/mm/dd hh:mm:ss 1000
,
HDLM Alert Driver
and subsequent parameter specified. The
command's
view
ElogMem Size
, and
HDLM Driver
dlnkmgr