Updating The License; Viewing Hdlm Version Information - Hitachi XP P9500 User Manual

>dlnkmgr -l view -sys -lic
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
>
For details on the displayed items and their descriptions, see
Information) on page

Updating the License

This section explains how to update the license.
To update the license, execute the dlnkmgr command's set operation with
the -lic parameter specified. When the confirmation message is displayed,
enter y to execute, or n to cancel the command. If the license key file does
not exist, a message asking you to enter the license key appears, so enter
the license key.
Note:
When you are executing the dlnkmgr command's set operation with the -
lic parameter to install the license, you can only execute it once at a
time. If you attempt to execute more than one dlnkmgr command
containing the set operation with the -lic parameter, the following
message might appear and HDLM might terminate abnormally:
KAPL01075-E A fatal error occurred in HDLM. The system
environment is invalid.
If this message appears, execute the dlnkmgr command's view operation
with the -sys -lic parameter to make sure that the license is installed
correctly.
The following shows an example in which the command is executed:
>dlnkmgr -l set -lic
KAPL01049-I Would you like to execute the operation? Operation name
= set [y/n]: y
KAPL01071-I A permanent license was installed.
>

Viewing HDLM Version Information

This section explains how to display HDLM version information.
To display HDLM version information, execute the dlnkmgr command's view
operation with the -sys parameter specified. The following is an example of
executing the command:
-
6-22.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for VMware(R))
view (Displays
4-7