Viewing Hdlm Version Information; Viewing Hdlm Component Information - Hitachi XP P9500 User Manual

environment is invalid.
If this message appears, execute the dlnkmgr command's view operation
with the -sys -lic parameter to make sure that the license is installed
correctly.
The following shows an example in which the command is executed:
>dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation? Operation name
= set [y/n]: y
KAPL01071-I A permanent license was installed.
>

Viewing HDLM Version Information

This section explains how to display HDLM version information.
To display HDLM version information, execute the dlnkmgr command's view
operation with the -sys parameter specified. The following shows an example
in which the command is executed:
>dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Remove LU
Intermittent Error Monitor
HDLM Manager Ver
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
>
The value displayed in HDLM version indicates the HDLM version.

Viewing HDLM Component Information

This section explains how to display HDLM component information.
x.x.x-xx
x.x.x-xx
x.x.x-xx
-
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Windows(R))
: x.x.x-xx
:
: on(extended lio)
: off
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
: on
: off
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss 128
WakeupTime
yyyy/mm/dd hh:mm:ss
ElogMem Size
4-11