The Installhdlm Utility For Installing Hdlm - Hitachi XP P9500 User Manual

No parameters
Displays installation information.
Example:
Table 7-2 Installation Information on page 7-16
make up the output installation information, as shown below.
installDirectory
version
#
The version that is output is the same as what is output for HDLM Version
when the HDLM command is executed with -sys specified for the view
operation. Note that when a service pack has been installed, the version
in Service Pack Version is output instead.
Each item and value is enclosed in double quotation marks (") and is output
in CSV format.

The installhdlm Utility for Installing HDLM

The installhdlm utility can perform a new installation, upgrade installation,
or re-installation of HDLM in the unattended installation mode. How the utility
should respond during an installation, and the HDLM function settings must
be predefined in an installation-information settings file.
You can also use this utility later to check the information that was set during
installation.
To perform an unattended installation, store the utility in the following
location:
drive-where-the-installation-DVD-has-been-inserted:\HDLM_Windows
\DLMTools
The utility to display the information set during installation is stored in the
following location:
HDLM-installation-folder\bin
7-16
Without specifying the -output parameter:
>dlmhostinfo
"installDirectory","C:\Program Files\Hitachi
\DynamicLinkManager"
"version","x.x.x-xx"
KAPL13801-I The dlmhostinfo utility for confirming HDLM
installation information completed normally.
Table 7-2 Installation Information
Item name
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
HDLM installation folder
Version of the installed HDLM
refers to the items that
Value
#