Installhdlm Utility For Installing Hdlm; Format; Parameters - Hitachi XP P9500 User Manual

page 7-41
installgetras.tar.gz.
output-directory-of-
collected-information-
specified-when-executing-
the- -installgetras-utility
/var/log
/var/tmp/hdlminstlog
#
This directory is created in directory-to-which-collected-information-is-
output specified when the installgetras utility was executed.

installhdlm Utility for Installing HDLM

You can use this utility to perform a new installation, upgrade installation, or
re-installation of HDLM.
The utility can also be used to perform an unattended installation. An
unattended installation enables a user to install HDLM without entering
information. Before you perform an unattended installation, you must define
the information required for installation in the installation-information
settings file.
For details about how to perform an unattended installation, see
HDLM on page

Format

mount-point-of-HDLM-installation-media/installhdlm [-v | -h | [-f
installation-information-settings-file-name]

Parameters

-v
Displays the version of HDLM to be installed.
-h
Displays the format of the installhdlm utility.
-f installation-information-settings-file-name
Specify this parameter when performing an unattended installation of
HDLM. Specify the installation-information settings file for this parameter.
describes the detailed information contained in
Table 7-10 Information Contained in installgetras.tar.gz
#
Output directory
3-75.
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
File
installgetras.log
messages
All subdirectories and
files
Description
Log file of the
installgetras utility
OS syslog file
Log information
created during HDLM
installation
Installing
7-41