Lag Membership - Dell PowerConnect 8024 User Configuration Manual

LAG Membership

Your switch supports 48 LAGs per system, and eight ports per LAG. Use the
LAG Membership page to assign ports to static and dynamic LAGs.
To display the LAG Membership page, click Switching → Link Aggregation
→ LAG Membership in the navigation panel.
Figure 27-5. LAG Membership
Adding a Port to a Static LAG
To add a static LAG member:
1 Open the LAG Membership page.
2 Click in the LAG row to toggle the port to the desired LAG.
The LAG number displays for that port. The LAG number increases each
time you click until the number reaches the maximum LAG number and
then returns to blank (no LAG assigned).
3 Click Apply.
The port is assigned to the selected LAG, and the device is updated.
798
Configuring Link Aggregation