Uploading Files; File Download Cli Commands; File Upload To Server - Dell PowerConnect 5316M User Manual

Running Configuration — Downloads commands into the Running Configuration file.
Startup Configuration — Downloads the Startup Configuration file, and overwrites it.
Backup Configuration — Downloads the Backup Configuration file, and overwrites it.
Downloading Files:
1
Open the File Download From Server page.
2
Define the file type to download.
3
Define the fields.
4
Click Apply Changes.
The software is downloaded to the switch module.
NOTE:
To activate the selected Image file, reset the switch module. For information on resetting the
switch module, see "Resetting the Switch Module" on page 78.
Downloading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
File Download From Server page.
Table 6-41. File Download CLI Commands
CLI Command
copy source-url destination-
url
The following is an example of the CLI commands:
downloading
console# copy tftp://10.6.6.64/pp.txt startup-config
....!
Copy: 575 bytes copied in 00:00:06 [hh:mm:ss]
01-Jan-2000 06:41:55 %COPY-W-TRAP: The copy operation was
completed successfully
N O T E : Each
indicates that ten packets were successfully transferred.
!

Uploading Files

The File Upload to Server page contains fields for uploading the software to the TFTP server from
the switch module. The Image file can also be uploaded from the File Upload to Server page. To
open the File Upload to Server page, click System → File Management → File Upload in the tree
view.
Description
Copies any file from a source to a destination.
Configuring System Information
161