Table of Contents
Advertisement
JUNOSe 11.1.x Policy Management Configuration Guide
Monitoring CLI-Based Packet Mirroring
Display brief or default (normal) information about your CLI-based packet mirroring
Purpose
environment, including interface analyzer information. To display secure packet
mirroring information you must enable the mirror-enable command before using
this command. This command displays a maximum of two secure policy attachments
and statistics, if configured.
To display the default (normal) format for a specific interface, which is used as the
Action
default analyzer interface:
host1#show ip interface atm 5/0.1
ATM5/0.1 line protocol Atm1483 is up, ip is analyzer (default)
To display the format for a specific interface, showing secure policy attachments:
host1#show ip interface atm 4/1.1
ATM5/0.1 line protocol Atm1483 is up
264
Monitoring CLI-Based Packet Mirroring
Network Protocols: IP
Internet address is 10.10.3.4/255.255.255.0
Broadcast address is 255.255.255.255
Operational MTU = 0
Administrative MTU = 0
Operational speed = 100000000
Discontinuity Time = 0
Router advertisement = disabled
Proxy Arp = disabled
Administrative debounce-time = disabled
Operational debounce-time
Access routing = disabled
Multipath mode = hashed
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
In Discarded Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Routed Packets 0, Bytes 0
Out Scheduler Dropped Packets 0, Bytes 0
Out Policed Packets 0, Bytes 0
Out Discarded Packets 0
Network Protocols: IP
Internet address is 10.10.7.14/255.255.255.0
Broadcast address is 255.255.255.255
Operational MTU = 0
Administrative MTU = 0
Operational speed = 100000000
Discontinuity Time = 0
Router advertisement = disabled
Proxy Arp = disabled
Administrative debounce-time = disabled
Operational debounce-time
Access routing = disabled
Multipath mode = hashed
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Administrative speed = 0
= disabled
Administrative speed = 0
= disabled
Advertisement
Table of Contents
Need help?
Do you have a question about the POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?
Questions and answers