Stack Master Election - Dell S4048–ON Configuration Manual

• Inter-switch stacking link failure
• Switch insertion
• Switch removal
If the master switch goes off line, the standby replaces it as the new master and the switch with the next highest priority or MAC address
becomes standby.

Stack Master Election

The stack elects a master and standby unit at bootup time based on two criteria.
• Unit priority — User-configurable. The range is from 1 to 14. A higher value (14) means a higher priority. The default is 0. By removing
the stack-unit priority using the no stack-unit priority command, you can set the priority back to the default value of zero.
The unit with the highest priority is elected the master management unit; the unit with the second highest priority is elected the
standby unit.
• MAC address (in case of priority tie) — The unit with the higher MAC value becomes the master unit. The stack takes the MAC
address of the master unit and retains it unless it is reloaded.
To view which switch is the stack master, enter the show system command.
Dell#show system
Stack MAC
Reload-Type
-- Unit 1 --
Unit Type
Status
Next Boot
Required Type
Current Type
Master priority
Hardware Rev
Num Ports
Up Time
Dell Networking OS Version : 1-0(0-5005)
Jumbo Capable
POE Capable
FIPS Mode
Burned In MAC
No Of MACs
-- Power Supplies
Unit Bay Status
---------------------------------------------------------------------------
1 1 up
1 2 absent
-- Fan Status --
Unit Bay TrayStatus
------------------------------------------------------------------------------------
1 1 up
1 2 up
1 3 up
Speed in RPM
-- Unit 2 --
Unit Type
Status
Next Boot
Required Type
Current Type
896 Stacking
: 34:17:eb:f2:94:c4
: normal-reload [Next boot : normal-reload]
: Management Unit
: online
: online
: S4048-ON - 54-port TE/FG (SK-ON)
: S4048-ON - 54-port TE/FG (SK-ON)
: 14
: 2.0
: 72
: 33 min, 51 sec
: yes
: no
: disabled
: 34:17:eb:f2:94:c4
: 3
--
Type FanStatus
UNKNOWN up
absent
Fan1 Speed
up 10134
up 10031
up 10031
: Standby Unit
: online
: online
: S4048-ON - 54-port TE/FG (SK-ON)
: S4048-ON - 54-port TE/FG (SK-ON)
FanSpeed(rpm)
10704
0
Fan2 Speed
up 10031
up 10031
up 10031