A Zenworks Services; A.1 Zenworks Services; Checking The Status Of A Zenworks Service; Starting A Zenworks Service - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM PLANNING-DEPLOYMENT-BEST PRACTICES GUIDE 10.3 30-03-2010 System Planning Manual

ZENworks Services
A
This section explains some of the Novell
greater detail, and also provides some useful information regarding logging, backing up, and
restoring the Certificate Authority.
Section A.1, "ZENworks Services," on page 93
Section A.2, "Useful URLs," on page 95
Section A.3, "Critical File Locations," on page 95
Section A.4, "Logging Information," on page 98
Section A.5, "Backing Up and Restoring the ZENworks Certificate Authority," on page 100

A.1 ZENworks Services

On a Windows ZENworks Primary Server, the services reside in the
directory. On a Linux ZENworks Primary Server, they reside in the
Section A.1.1, "Checking the Status of a ZENworks Service," on page 93
Section A.1.2, "Starting a ZENworks Service," on page 93
Section A.1.3, "Stopping a ZENworks Service," on page 94
Section A.1.4, "Restarting a ZENworks Service," on page 94
Section A.1.5, "ZENworks Services," on page 94
A.1.1 Checking the Status of a ZENworks Service
1 At the server command prompt, enter the following command:
/etc/init.d/servicename status
Replace servicename with the name of the service as listed in
Services," on page
A.1.2 Starting a ZENworks Service
To start a ZENworks service on a Windows ZENworks Primary Server:
1 Click Start > Administrative Tools > Services.
2 Select the service you want to start, then click Start.
To start a ZENworks service on a Linux ZENworks Primary Server:
1 Enter the following command at the server console prompt:
/etc/init.d/servicename start
Replace servicename with the name of the service as listed in
Services," on page
®
ZENworks
94.
94.
®
Configuration Management services in
\novell\zenworks\bin
/etc/init.d
Section A.1.5, "ZENworks
Section A.1.5, "ZENworks
A
directory.
ZENworks Services 93