Access The Management Interface From The Web - NETGEAR XS728T ProSAFE Software Administration Manual

Access the Management Interface from the Web

To access the switch management interface, use one of the following methods:
• From the Smart Control Center, select the switch and click Web Browser Access. For
more information, see the documentation for this application at
http://docs.netgear.com/scc/enu/202-10685-01/index.htm.
• Open a web browser and enter the IP address of the switch in the address field.
You must be able to ping the IP address of the NETGEAR switch management interface from
your administrative system for web access to be available. If you used the Smart Control
Center to set up the IP address and subnet mask, either with or without a DHCP server, use
that IP address in the address field of your web browser. If you did not change the IP address
of the switch from the default value, enter 192.168.0.239 into the address field.
Clicking Web Browser Access on the Smart Control Center or accessing the switch directly
from your web browser displays the Login screen.
Understand the User Interface
To access the switch by using a web browser, the browser must meet the following software
requirements:
• Internet Explorer versions 9 to 11
• Firefox version 31-33
• Chrome versions 38-40
• Safari
• On Windows OS: 5.1.7
• On MAC OS: 8.0.2 (MAC OS version 10.10)
To log on to the web interface:

1. Open a web browser and enter the IP address of the switch in the web browser address
field.
2. The factory default password is password. Type the password in the field on the Login
screen and click Login. Passwords are case-sensitive.
3. After the system authenticates you, the System Information screen displays.
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
Getting Started
8