Web Interface: Authenticating Dot1X Users By A Radius Server - NETGEAR M4200 Software Administration Manual

6. Configure an accounting server.
(Netgear Switch) (Config)#radius accounting mode
(Netgear Switch) (Config)#radius server host acct 10.100.5.17
7. Configure the shared secret between the accounting server and the client.
(Netgear Switch) (Config)#radius server key acct 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
Web Interface: Authenticating dot1x Users by a RADIUS
Server
1. Enable routing for the switch.
a. Select Routing > Basic > IP Configuration.
A screen similar to the following displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply to save the settings.
2. Assign IP address 192.168.1.1/24 to the interface 1/0/1.
a. Select Routing > Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Under IP Interface Configuration, scroll down and select the Interface 1/0/1 check
box.
Now 1/0/1 appears in the Interface field at the top.
Managed Switches
Security Management
317