Display Learned Mac Addresses And Convert Them To Static Addresses - NETGEAR S3600 Series User Manual

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
• No: The port is not shut down if a violation occurs. This is the default setting.
• Yes: The port is shut down if a violation occurs.
An example of a violation is an incoming packet from a disallowed MAC address.
13. From the Enable Violation Traps menu, select to enable or disable the transmission
of an SNMP trap if a violation occurs:
• No: A trap is not sent if a violation occurs. This is the default setting.
• Yes: A trap is sent if a violation occurs.
14. Click the Save button.
Your settings are saved.
Display learned MAC addresses and convert
them to static addresses
After you enable port security globally (see Configure the global port security mode
on page 427) and enable port security for specific interfaces (see Configure a port security
interface on page 428), you can convert a dynamically learned MAC address to a statically
locked address.
To display learned MAC addresses for an individual port or LAG and convert these
MAC addresses to static MAC addresses:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network,
or connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser and enter the IP address of the switch in the address field of
your web browser.
If you do not know the IP address of the switch, see Access the switch on-network
and connected to the Internet on page 25 or Access the switch off-network and not
connected to the Internet on page 32.
The Device Admin Password page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
Manage Switch Security 430 User Manual