Table 4-65 Multicast Filtering Commands - SMC Networks 6152L2 - annexe 1 Management Manual

C L
OMMAND INE
Example
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port
--------- ---- ---
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
. .
.
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Console#
Related Commands
map ip dscp (Global Configuration) (4 -229)
map ip dscp (Interface Configuration) (4 -230)
Multicast Filtering Commands
This switch uses IGMP (Internet Group Management Protocol) to query
for any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data
out to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to
receive the multicast service.
Command Groups
IGMP Snooping
IGMP Query
Static Multicast
Routing
4-232
I
NTERFACE
DSCP COS
0 0
1 0
2 0
3 0
61 0
62 0
63 0

Table 4-65 Multicast Filtering Commands

Function
Configures multicast groups via IGMP snooping
or static assignment, sets the IGMP version,
displays current snooping and query settings, and
displays the multicast service and group
members
Configures IGMP query parameters for
multicast filtering at Layer 2
Configures static multicast router ports
Page
4-233
4-238
4-242