Multicast Filtering Commands; Table 4-65 Multicast Filtering Commands - SMC Networks 6824MPE INT Management Manual

C L
OMMAND INE

Multicast Filtering Commands

This switch uses IGMP (Internet Group Management Protocol) to query for
any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data out
to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to receive
the multicast service.
Command Groups
IGMP Snooping
IGMP Query (Layer 2) Configures IGMP query parameters for multicast
Static Multicast
Routing
4-260
I
NTERFACE

Table 4-65 Multicast Filtering Commands

Function
Configures multicast groups via IGMP snooping or
static assignment, sets the IGMP version, displays
current snooping and query settings, and displays the
multicast service and group members
filtering at Layer 2
Configures static multicast router ports
Page
4-261
4-265
4-270