Time Commands; Sntp Client; Table 4-22 Time Commands - SMC Networks 8748L2 Management Manual

Time Commands

The system clock can be dynamically set by polling a set of specified time
servers (NTP or SNTP). Maintaining an accurate time on the switch
enables the system log to record meaningful dates and times for event
entries. If the clock is not set, the switch will only record the time from the
factory default set at the last bootup.
Command

sntp client

sntp server
sntp poll
show sntp
clock timezone
calendar set
show calendar
sntp client
This command enables SNTP client requests for time synchronization
from NTP or SNTP time servers specified with the sntp servers
command. Use the no form to disable SNTP client requests.
Syntax
[no] sntp client
Default Setting
Disabled
Command Mode
Global Configuration

Table 4-22 Time Commands

Function
Accepts time from specified time servers
Specifies one or more time servers
Sets the interval at which the client polls for
time
Shows current SNTP configuration settings
Sets the time zone for the switch's internal
clock
Sets the system date and time
Displays the current date and time setting
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 4-69
GC 4-69
GC 4-71
NE, 4-72
PE
GC 4-72
PE 4-73
NE, 4-74
PE
4-69